We use cookies to enhance your experience. By continuing to browse this site you agree to our use of cookies. More info.
Hydrogen (H2) is a chemical element that is used in a wide range of applications, such as in the synthesis of ammonia, hydrogenation of unsaturated organic compounds, hydro-treating of petroleum feedstocks to remove nitrogen and sulfur, and as a fuel for proton exchange membrane (PEM) fuel cells. Currently, more than 90% of H2 is produced through steam reforming of hydrocarbons and natural gas. The syngas (carbon monoxide (CO) + H2) generated by steam reforming is processed via low-temperature water gas shift (WGS) and high-temperature WGS reactions to further use CO in the syngas to generate additional H2 from water. This is later followed by purification of H2.
Fe2O3-Cr2O3 is a high-temperature WGS catalyst that is commercially available in the market, while CuO-ZnO-Al2O3 is a low-temperature WGS catalyst. Although these catalysts are employed in commercial hydrogen plants, they are not suitable for applications that require compact reactors, for instance in fuel production for PEM fuel cells, due to the low activities of these catalysts. For mobile or distributed applications, reactors using conventional WGS catalysts are large and bulky. In addition, both conventional catalysts experience a pyrophoric issue when exposed to air, which may cause safety issues. Pre-reduction must also be performed for these catalysts.
To simplify the design of the system, engineers at Nexceris have developed a highly active WGS catalyst, based on proprietary nanoscale mixtures of evenly integrated precious metals and mixed oxides.
To exploit the performance improvement in the Reformance-WGS™ catalysts, specialized metal supported technologies have been integrated into them to provide excellent heat transfer and mechanical robustness. Benefits include:
In order to improve the WGS activity, Nexceris engineers have exploited the designs of mixed oxides and precious metal catalysts that were initially designed for on-board fuel reforming for PEM fuel cell applications. To test the performance of WGS, a tubular reactor was filled with Reformance-WGS™ granules of 35-60 mesh size (Figures 1 and 2).
Figure 1. Water gas shift activities on Reformance-WGS™ and a commercial FeCrOx catalyst under the conditions of 1 atm, 6.9%CO, 31.0%H2O, 10.3%CO2, 50.3%H2, 1.4%N2 and GHSV = 60,000 ml/g-hr.
Figure 2. Water gas shift activities of Reformance-WGS™ and a commercial CuZnAlOx catalyst under the conditions of 1atm, 6.9%CO, 31.0%H2O, 10.3%CO2, 50.3%H2, 1.4%N2 and GHSV = 300,000ml/g-hr.
In Figure 1, higher CO conversion is exhibited by Reformance-WGS™ compared to the competing Fe-Cr oxides at temperatures of 200 to 375°C, and also (in Figure 2) outperform Cu-Zn-Al oxides when the temperature is over 280°C. These factors make Reformance-WGS™ an excellent medium temperature catalyst for single-stage reactor systems. This catalyst was washcoated on a cordierite monolith and then tested (Figure 3).
Figure 3. Water gas shift activities of Nexceris catalyst wash coated monolith under the conditions of 1atm, 6.9%CO, 31.0%H2O, 10.3%CO2, 50.3%H2, 1.4%N2 and GHSV = 20,000h- 1.
As shown, equilibrium conversions of CO were acquired at a GHSV of 20,000 h-1 and at a temperature of 290°C with Reformance-WGS™, while the competing conventional CuO-ZnO-Al2O3 catalyst is unable to achieve such high conversions. The outcomes have shown that Nexceris’ catalyst offers a number of benefits over the commercial WGS catalysts. These benefits include:
Foam structures, metallic monolith, and high thermal conductivity serve as excellent substrates for both exothermic and endothermic reactions (Figure 4).
Figure 4. Metal monolith supported catalyst
The metallic substrates provide the following advantages for WGS reactions:
Increased catalyst loading on the substrate can translate into increased reactor activity, but dense layers can produce poor adhesion because the thermal difference between the catalyst layer and the metallic substrate surmounts the bond’s shear strength at the interface between them. While a ceramic layer can be created at the surface, by oxidizing traditional metallic substrates, these layers tend to be relatively thick and smooth and have restricted anchoring sites for the coating.
Nexceris has devised an Alumi-Lok™ aluminization process for metals, which is cost-effective and also delivers high performance. The pure metal surfaces are coated with an aluminum precursor coating, and they are oxidized to produce a three-layered microstructure, containing a highly porous alumina top-coat (Figure 5a—Region I), a diffusion layer of aluminide (Region II), and a skeleton of metallic nickel alloy (Region III).
Figure 5. Cross-section SEM images with overlay compositional EDS maps of aluminized steel foam achieved using Alumi-Lok™ aluminization technology.
The porous layer of Al2O3 is a high-surface area that is suitable to washcoat an interlocking layer of catalyst. The Region II aluminide diffusion layer and the Region III metal skeleton layers sustain good mechanical ruggedness and thermal conductivity. These features collectively produce useful and unique substrates for the applications.
Structured-catalyst developed by Nexceris exhibits excellent properties for the production of H2. Metallic substrates have a high thermal conductivity that can mitigate hot spots and power the WGS reactions toward a thermal-equilibrium-favorable direction. Using the new technique of material synthesis, Nexceris can generate WGS catalyst that has better intrinsic stability and activity. By using the Alumi-Lok™ aluminization process to customize the catalyst and substrate interface, loading and adhesion of catalysts on the substrates can be increased. H2 productivity is considerably increased on Nexceris’ novel catalyst when it is applied to fixed-bed reactors as opposed to the traditional WGS catalysts.
Download the White Paper for More Information
The shift catalyst developed by Nexceris can be produced in the form of pellets and ceramic or metallic washcoated monoliths. Monolithic designs enable better utilization of the catalyst and also minimize reactor backpressure. When small reactors are required to produce H2, metal supported catalysts can be applied to fixed bed reactors to change CO into H2 at 300 to 400°C. This packaging method provides significant size and weight benefits. Based on the computations, the size of the reactor can be reduced to 5 to 10% of the existing two-stage WGS systems.
This information has been sourced, reviewed and adapted from materials provided by Nexceris, LLC.
For more information on this source, please visit Nexceris, LLC.
Please use one of the following formats to cite this article in your essay, paper or report:
Nexceris. (2018, August 07). Reformance-WGS™ Non-Pyrophoric Water Gas Shift Catalyst. AZoM. Retrieved on May 14, 2022 from https://www.azom.com/article.aspx?ArticleID=12718.
Nexceris. "Reformance-WGS™ Non-Pyrophoric Water Gas Shift Catalyst". AZoM. 14 May 2022. <https://www.azom.com/article.aspx?ArticleID=12718>.
Nexceris. "Reformance-WGS™ Non-Pyrophoric Water Gas Shift Catalyst". AZoM. https://www.azom.com/article.aspx?ArticleID=12718. (accessed May 14, 2022).
Nexceris. 2018. Reformance-WGS™ Non-Pyrophoric Water Gas Shift Catalyst. AZoM, viewed 14 May 2022, https://www.azom.com/article.aspx?ArticleID=12718.
Do you have a review, update or anything you would like to add to this article?
AZoM speaks with Dr. Nicola Ferralis from MIT about his research that has developed a low-cost process of creating carbon fibers from hydrocarbon pitch. This research could lead to the large-scale use of carbon fiber composites in industries that have thus far been limited.
In this interview, AZoM speaks with Marco Enger, Senior Tribologist from GGB, to discuss how nano fillers affect transfer films within tribological systems.
Ahead of their talk on green chemistry and profitability in laboratory research at ChemUK 2022, AZoM spoke with Jacqueline Balian from Gambica and Martyn Fordman from Asynt about encouraging sustainability in the chemical industry.
COXEM's CP-8000+ is a powerful cross section polishing tool that uses an argon ion beam to allow precise, advanced sample preparation. Its state-of-the-art technology means the sample is not deformed and does not suffer any kind of physical damage.
This product profile outlines the Evolution™ Pro UV-Vis Spectrophotometers from Thermo Fisher Scientific.
Extrel’s all-new MAX300-RTG 2.0 is the real-time industrial gas analyzer now redesigned with a touch screen.
This article provides an end-of-life assessment of lithium-ion batteries, focusing on the recycling of an ever-growing amount of spent Li-Ion batteries in order to work toward a sustainable and circular approach to battery use and reuse.
Corrosion is the degradation of an alloy caused by its exposure to the environment. Corrosion deterioration of metallic alloys exposed to the atmosphere or other adverse conditions is prevented using a variety of techniques.
Due to the ever-increasing demand for energy, the demand for nuclear fuel has also increased, which has further created a significant increase in the requirement for post-irradiation examination (PIE) techniques.
AZoM.com - An AZoNetwork Site
Owned and operated by AZoNetwork, © 2000-2022