We use cookies to enhance your experience. By continuing to browse this site you agree to our use of cookies. More info.
New research in the journal Green Chemical Engineering has presented an electrochemical process that reduces CO2 into usable formate.
Study: Nanoporous tin oxides for efficient electrochemical CO2 reduction to formate . Image Credit: PK Designs/Shutterstock.com
In recent years climate scientists and researchers have made it known that to preserve a livable climate greenhouse-gas emissions must be reduced to net-zero by 2050, at the latest. Modern industry has contributed to a significant increase in the concentration of carbon dioxide (CO2) in the atmosphere over the last 40 years – from around 339 parts per million in 1980 to 412 parts per million in 2020.
Reducing and converting CO2 into useful materials and chemicals remains a consistent challenge in trying to overcome the anthropogenic carbon cycle. However, a team of researchers at Tianjin University in China have presented an electrochemical process for the reduction reaction of CO2.
(a–e) SEM micrographs of Sn foil after anodization at various potentials in 1 M NaOH; (f) anodic oxidation i-t curves at various potentials in 1 M NaOH. Image Credit: Hai Liu et al., Green Chemical Engineering
Using nanoporous tin oxides, the team demonstrated the potential for a scalable electrochemical anodic oxidation method. The ability to reduce CO2 to formate is appealing as it only requires two electrodes and can be performed at room temperature, with high atom efficiency.
The anodic oxidation method or electro-oxidation generates an oxide layer on a metallic substrate. Tin and its oxide have been previously identified as a suitable catalyst for electrochemical CO2 reduction reaction (CO2RR) and formate production due to a low environmental impact and at a relatively low cost.
“Nanoporous tin oxide catalysts were prepared by a simple one-step AO method, followed by scanning electron microscope (SEM), transmission electron microscope (TEM), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS) to characterize the morphology and structure of the catalyst,” explained co-author of the study Professor Sheng Zang of the School of Chemical Engineering at Tianjin University.
Tin oxide-based nanomaterials can be vitally important in catalysis processes due to the presence of intrinsic acidic and redox characters. Additionally, the properties of tin oxide can be altered by inserting cation or anion species into its structure and interaction with other oxides.
Zang and his team believe that their results demonstrated a working method for the production of a nanoporous tin oxide catalyst for CO2RR. They also declared there was potential scope for industrial application of the method.
TEM (a), HR-TEM (b) and SAED (selected area electron diffraction) (c) images of porous SnO2; (d) SEM-element mapping images; (e) XRD pattern of the prepared Sn catalysts.Image Credit: Hai Liu et al., Green Chemical Engineering
Often, catalyst production for electrochemical methods can be time-consuming and costly, which restricts access to commercial scalability. Therefore, developing efficient cost-effective catalysts for selective electrochemical CO2RR to high-value products is crucial for the deployment of carbon utilization technologies.
In fact, making such progress could make a significant contribution towards carbon neutrality (Net-Zero), and CO2RR is deemed as one of the most promising approaches for the reduction of CO2 in the atmosphere and the production of alternative energy strategies.
“Among CO2 conversion technologies, electrocatalytic CO2 reduction reaction (CO2RR) has been considered as a most promising strategy to realize renewable energy storage and carbon neutralization,” Zang states.
As renewable electricity continues to decrease in price, CO2RR products, specifically those single carbon molecules such as carbon monoxide (CO) and formate, acquire a competitive price in contrast to traditional chemical engineering processes due to their industrially relevant selectivity.
There are still a number of challenges that necessitate further research to refine the CO2RR process to higher carbon products. One of these challenges is meeting the demand for actual industrial application, as CO2RR to formate demands a minimum of 200 mA·cm−2 current density and over 80% formate faradaic efficiency.
The China-based researchers were able to show that the nanoporous tin catalysts (SnO2) displayed superior formate faradaic efficiency compared with untreated tin foils: “In general, a 20–30% increases in formate faradaic efficiency was achieved after AO treatment,” Zang stated.
Additionally, the formate also demonstrated excellent properties which offered the team signs of encouragement: “Further flow cell test showed a formate partial current density of 285 mA·cm−2 with the selectivity of 96.4%, indicating a promising industrial application prospect,” explained Zang.
(a) Flow setup diagram; Potential-dependent i-t curves (b) and faradaic efficiencies and partial current density (c) of formate at various potentials of porous SnO2. Image Credit: Hai Liu et al., Green Chemical Engineering
If CO2RR and the simple, cost-effective production of catalysts can be realized in the near future it could open up the door for a revolution in green-energy storage and supply. The electrochemical conversion of CO2 to fuels and even feedstocks is a sophisticated solution to ending the carbon cycle when coupled with other renewable energy sources.
Formic acid and its salt (formate) are considered one of the most valuable CO2RR products due to their wide application potential in various fields. From being widely used in feedstock, and leather tanning processes to use in fuel cells and electronics, it’s clear to see how developing reduction and conversion processes could change the way we think about CO2.
Hai Liu, Baiyu Miao, Hongyuan Chuai, Xiaoyi Chen, Sheng Zhang, Xinbin Ma, Nanoporous tin oxides for efficient electrochemical CO2 reduction to formate, Green Chemical Engineering, 2021. https://www.sciencedirect.com/science/article/pii/S2666952821000728?via%3Dihub
Disclaimer: The views expressed here are those of the author expressed in their private capacity and do not necessarily represent the views of AZoM.com Limited T/A AZoNetwork the owner and operator of this website. This disclaimer forms part of the Terms and conditions of use of this website.
David is an academic researcher and interdisciplinary artist. David's current research explores how science and technology, particularly the internet and artificial intelligence, can be put into practice to influence a new shift towards utopianism and the reemergent theory of the commons.
Please use one of the following formats to cite this article in your essay, paper or report:
Cross, David. (2021, November 16). Converting CO2 to Formate with Nanoporous Tin Oxides. AZoM. Retrieved on August 08, 2022 from https://www.azom.com/news.aspx?newsID=57337.
Cross, David. "Converting CO2 to Formate with Nanoporous Tin Oxides". AZoM. 08 August 2022. <https://www.azom.com/news.aspx?newsID=57337>.
Cross, David. "Converting CO2 to Formate with Nanoporous Tin Oxides". AZoM. https://www.azom.com/news.aspx?newsID=57337. (accessed August 08, 2022).
Cross, David. 2021. Converting CO2 to Formate with Nanoporous Tin Oxides. AZoM, viewed 08 August 2022, https://www.azom.com/news.aspx?newsID=57337.
Do you have a review, update or anything you would like to add to this news story?
At the Advanced Materials Show 2022, AZoM caught up with the CEO of Cambridge Smart Plastics, Andrew Terentjev. In this interview, we discuss the company's novel technologies and how they could revolutionize how we think about plastics.
At the Advanced Materials Show in June 2022, AZoM spoke with Ben Melrose from International Syalons about the advanced materials market, Industry 4.0, and efforts to move toward net-zero.
At the Advanced Materials Show, AZoM spoke with Vig Sherrill from General Graphene about the future of graphene and how their novel production technique will lower costs to open up a whole new world of applications in the future.
This product Profile outlines the ZEISS SmartPI-Smart Particle Investigator.
Discover the OTT Parsivel², a laser disdrometer that can be used to measure all precipitation types. It allows users to collect data on the size and speed of falling particles.
Environics offers stand alone permeation systems that can be used for single or multiple disposable permeation tubes.
This article provides an end-of-life assessment of lithium-ion batteries, focusing on the recycling of an ever-growing amount of spent Li-Ion batteries in order to work toward a sustainable and circular approach to battery use and reuse.
Corrosion is the degradation of an alloy caused by its exposure to the environment. Corrosion deterioration of metallic alloys exposed to the atmosphere or other adverse conditions is prevented using a variety of techniques.
Due to the ever-increasing demand for energy, the demand for nuclear fuel has also increased, which has further created a significant increase in the requirement for post-irradiation examination (PIE) techniques.
AZoM.com - An AZoNetwork Site
Owned and operated by AZoNetwork, © 2000-2022